Em estoque Produto em alta
CHARX T1HBI12-1AC80DC200-7,0M1
CHARX T1HBI12-1AC80DC200-7,0M1 1507250 PHOENIX CONTACT CHARX connect, Charging input for vehicles, for charg..
$0.00
USD
4599 em estoque
Especificações principais
:
for installation in electric vehicles (EV)
Coding:
2.7 kΩ (between PE and CS)
Number:
5 (L1, N, PE, DC+, DC-)
General:
A protective cap is supplied as standard for the DC and AC contacts.
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| for installation in electric vehicles (EV) | |
| Coding | 2.7 kΩ (between PE and CS) |
| Number | 5 (L1, N, PE, DC+, DC-) |
| General | A protective cap is supplied as standard for the DC and AC contacts. |
| Altitude | 4000 m (above sea level) |
| Cable type | Single wires |
| Resistance | max. 1200 Ω ±5 K |
| Application | for charging with alternating current (AC) and with direct current (DC) |
| Sensor type | PTC chain |
| Cable length | 7 m |
| Product type | Vehicle charging inlet |
| Charging mode | Mode 2, 3, 4 |
| Fixing screws | M6 |
| Mounting type | Front and rear mounting (0 to 90 degree frontal inclination possible) |
| Rated current | 80 A AC |
| Rated voltage | 250 V AC |
| Charging power | 20 kW |
| Product family | CHARX connect |
| Cable structure | 2 x 70 mm² |
| Color (Housing) | black (9005) |
| Insertion force | < 100 N |
| Attachment point | Sensor for the AC contacts |
| Cable resistance | ≤ 0.259 Ω/km |
| Charging current | 80 A |
| Lock recognition | available |
| Withdrawal force | < 100 N |
| Charging standard | CCS type 1 |
| Cross section AWG | (converted acc. to IEC) |
| Operating voltage | 12 V |
| Material (Housing) | Plastic |
| Single wire, color | OG |
| Ambient temperature | -40 °C ... 130 °C (Operation) |
| Color (Mating face) | black (9005) |
| Insulation resistance | > 200 MΩ |
| Single wire, material | Silicone |
| Standards/regulations | DIN˽EN 60738-1 |
| Mounting hole diameter | 6.70 mm (ø) |
| Temperature monitoring | AC contacts: PTC chain (DIN˽EN˽60738-1) |
| External cable diameter | 17.9 mm ±0.3 mm |
| Temperature measurement | DC contacts: 2x PT1000 (DIN EN 60751) |
| Note number of positions | 4-pos. |
| Type of charging current | AC single-phase |
| Material (Contact surface) | Silver |
| Measuring range_resistance | 790 Ω ... 1420 Ω |
| Single wire, cross section | 70.00 mm² |
| Insertion/withdrawal cycles | > 10000 |
| Recommended adaptation time | 600 ms |
| Type of signal transmission | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Mechanical emergency release | available |
| Reverse current of the motor | max. 1.5 A |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Service life insertion cycles | > 10000 load cycles |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Position of the locking actuator | top center |
| Typical motor current for locking | 0.25 A |
| Pause time after entry or exit path | 3 s |
| Max. dwell time with reverse current | 1 s |
| Maximum voltage for locking detection | 12 V |
| Possible power supply range at the motor | 9 V ... 16 V |
| Screws included in the scope of delivery | none |
Descrição do produto
CHARX connect, Vehicle Entry
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
