Em estoque Produto em alta
EMG 22-REL/KSR-230/21/AU
EMG 22-REL/KSR-230/21/AU 2949295 PHOENIX CONTACT Relay Module
$0.00
USD
4184 em estoque
Especificações principais
:
Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths
Note:
the following values are applicable if a gold layer is destroyed
Color:
green (RAL 6021)
Depth:
62.5 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths | |
| Note | the following values are applicable if a gold layer is destroyed |
| Color | green (RAL 6021) |
| Depth | 62.5 mm |
| Width | 22.5 mm |
| Height | 75 mm |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Insulation | Basic insulation |
| Application | Universal |
| Product type | Relay Module |
| Screw thread | M3 |
| Assembly note | in rows with zero spacing |
| Mounting type | DIN rail mounting |
| Operating mode | 100% operating factor |
| Product family | EMG |
| Article revision | 09 |
| Contact material | AgNi, hard gold-plated |
| Drive (polarity) | polarized |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Drive and function | monostable |
| Protective circuit | Bridge rectifier; Bridge rectifier |
| Input voltage range | 207 V AC/DC ... 243.8 V AC/DC (20 °C) |
| Rated surge voltage | 4 kV |
| Degree of protection | IP20 |
| Overvoltage category | III |
| Typical release time | 10 ms |
| Standards/regulations | IEC 60664-1 |
| Typical response time | 8 ms |
| Contact switching type | 1 changeover contact |
| Maximum inrush current | 50 mA |
| Type of switch contact | Single contact |
| Mechanical service life | approx. 5x 107cycles |
| Nominal input voltage UN | 230 V AC/DC |
| Rated insulation voltage | 260 V AC |
| Maximum switching voltage | 30 V AC |
| Operating voltage display | Yellow LED |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 50 mA |
| Typical input current at UN | 5 mA |
| Date of last data management | 02.05.2024 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Test voltage (Winding/contact) | 5 kVrms(50 Hz, 1 min., winding/contact) |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Maximum power dissipation for nominal condition | 1.15 W |
Descrição do produto
Relay module, with soldered mini-switching relay, contact (AgNi+Au): Small to large powers, 1 switched contacts, input voltage 230 V AC/DC
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
