Em estoque Produto em alta
FLT-SEC-T1-350/25-P
FLT-SEC-T1-350/25-P 2905471 PHOENIX CONTACT Type 1/2 surge protection plug
$0.00
USD
4525 em estoque
Especificações principais
GTIN:
4046356950688
Note:
Made to Order (non-returnable)
Orderkey:
2905471
Catalog page:
Page 42 (C-4-2017)
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| GTIN | 4046356950688 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2905471 |
| Catalog page | Page 42 (C-4-2017) |
| Packing unit | 1 pc |
| Country of origin | DE (Germany) |
| (Connection data) | L-G |
| (UL specifications) | EN 61643-11 2012 |
| Custom tariff number | 85363030 |
| (Ambient conditions) | PBT-FR |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | Male |
| (Additional descriptions) | 457 V AC (120 min / safe failure mode) |
| Color (Ambient conditions) | light grey RAL 7035 |
| SPD Type (Connection data) | 1CA |
| Depth (Key Commercial Data) | 59.4 mm |
| Width (Key Commercial Data) | 23.5 mm |
| EN type (Ambient conditions) | T1 / T2 |
| Height (Key Commercial Data) | 46.4 mm |
| Nom. voltage (Connection data) | 240 V AC |
| Shock (operation) (Dimensions) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Degree of protection (Dimensions) | IP20 |
| Mounting type (Ambient conditions) | on base element |
| Vibration (operation) (Dimensions) | 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
| Nominal frequency (Connection data) | 50/60 Hz |
| Mode of protection (Connection data) | L-N |
| Weight per Piece (excluding packing) | 151.800 g |
| Housing material (Ambient conditions) | PA 6.6-FR 20% GF |
| Horizontal pitch (Key Commercial Data) | 2 Div. |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Mode of protection (Ambient conditions) | L-N |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 1 |
| Standards/regulations (UL specifications) | IEC 61643-11 2011 |
| Response time tA (Additional descriptions) | ≤ 25 ns |
| Power distribution system (Connection data) | Single phase |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | TT |
| IEC test classification (Ambient conditions) | I / II |
| Nominal voltage UN (Additional descriptions) | 240 V AC (TN) |
| TOV behavior at UT (Additional descriptions) | 415 V AC (5 s / withstand mode) |
| Connection method (Additional technical data) | pluggable |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Nominal discharge current In (Connection data) | 20 kA |
| Nominal frequency fN (Additional descriptions) | 50 Hz (60 Hz) |
| Residual voltage Ures (Additional descriptions) | ≤ 1.5 kV (at In) |
| Voltage protection rating VPR (Connection data) | 1200 V |
| Surge protection fault message (Ambient conditions) | optical |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Short-circuit current rating (SCCR) (Connection data) | 50 kA |
| Voltage protection level Up (Additional descriptions) | ≤ 1.5 kV |
| Maximum continuous voltage UC (Additional descriptions) | 350 V AC |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Maximum continuous operating voltage MCOV (Connection data) | 264 V AC |
| Short-circuit current rating ISCCR (Additional descriptions) | 25 kA (264 V AC) |
| Follow current interrupt rating Ifi (Additional descriptions) | 25 kA (264 V AC) |
| Max. backup fuse with branch wiring (Additional descriptions) | 315 A (gG) |
| Maximum discharge current Imax(8/20) µs (Protective circuit) | 100 kA |
| Nominal discharge current In(8/20) µs (Additional descriptions) | 25 kA |
| Impulse discharge current (10/350) µs, charge (Additional descriptions) | 12.5 As |
| Front of wave sparkover voltage at 6 kV (1.2/50) µs (Additional descriptions) | ≤ 1.5 kV |
| Impulse discharge current (10/350) µs, peak value limp (Additional descriptions) | 25 kA |
| Impulse discharge current (10/350) µs, specific energy (Additional descriptions) | 160 kJ/Ω |
Descrição do produto
Replacement connectors for lightning and surge arresters from the FLASHTRAB SEC product line, for the L-N and L-PEN sections.
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
