Horário de atendimento: Segunda a sexta, das 9h às 18h.
FLT-SEC-T1+T2-2C-350/25-FM - FLT-SEC-T1+T2-2C-350/25-FM 2905467 FLT‐CP‐2C‐350 2859770 PHOENIX CONTACT Type 1+2 protective device combinat..
Em estoque Produto em alta

FLT-SEC-T1+T2-2C-350/25-FM

FLT-SEC-T1+T2-2C-350/25-FM 2905467 FLT‐CP‐2C‐350 2859770 PHOENIX CONTACT Type 1+2 protective device combinat..

$0.00 USD
3512 em estoque
Especificações principais
: I
Note: 2011
Type: DIN rail module, two-section, divisible
Depth: 74.5 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico

Especificações técnicas

Parâmetro Valor
I
Note 2011
Type DIN rail module, two-section, divisible
Depth 74.5 mm
Width 71.2 mm
Height 95.2 mm
EN type T1
Altitude ≤ 2000 m (amsl)
SPD Type 2CA
Product type Arrester combination
Screw thread M5
Mounting type DIN rail: 35 mm
Material group I
Product family SEC Family
Connection name Remote fault indicator contact
Nominal voltage 240 V AC
Open side panel No
Article revision 10
Horizontal pitch 4 Div.
Housing material PA 6.6-FR 20 % GF
Pollution degree 2
Response time tA ≤ 25 ns
Stripping length 18 mm
Connection method Screw terminal blocks
Nominal frequency 50/60 Hz
Operating current 10 mA AC ... 1 A AC
Operating voltage 12 V AC ... 250 V AC
Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Tightening torque 4.5 Nm
Mode of protection L-PEN
Nominal voltage UN 240/415 V AC (TN-C)
Switching function Changeover contact
TOV behavior at UT 415 V AC (5 s / withstand mode)
Dimensional drawing
Direction of action 2L-N/PE
Insulating material PA6.6-FR 20% GF
Number of positions 2
AC operating current 1 A AC
Color (Base element) gray (RAL 7042)
Degree of protection IP20 (only when all terminal points are used)
Nominal frequency fN 50 Hz (60 Hz)
Overvoltage category III
CTI value of material 600
Rated load current IL 125 A (< 55 °C)
Residual voltage Ures ≤ 1.5 kV (at In)
Standards/regulations DIN VDE 0110-1 / IEC 60664-1 / IEC 61643-1
Vibration (operation) 5g (5 - 500 Hz/2.5 h/X, Y, Z)
Color (Male connector) light gray (RAL 7035)
IEC power supply system TN-C
IEC test classification I + II
Standards/specifications IEC 61643-11
Power distribution system Delta
Conductor cross section AWG 13 ... 2
Voltage protection level Up ≤ 1.5 kV
Nominal discharge current In 20 kA
Conductor cross section rigid 2.5 mm² ... 35 mm²
Maximum continuous voltage UC 350 V AC
Surge protection fault message Optical, remote indicator contact
Ambient temperature (operation) -40 °C ... 80 °C
Conductor cross section flexible 2.5 mm² ... 35 mm²
Permissible humidity (operation) 5 % ... 95 %
Short-circuit current rating ISCCR 25 kA (264 V AC)
Follow current interrupt rating Ifi 25 kA (264 V AC)
Max. backup fuse with branch wiring 315 A (gG)
Short-circuit current rating (SCCR) 50 kA
Voltage protection rating VPR (L-G) 1200 V
Voltage protection rating VPR (L-L) 2000 V
Flammability rating according to UL 94 V-0
Nominal discharge current In(8/20) µs 25 kA
Ambient temperature (storage/transport) -40 °C ... 80 °C
Maximum discharge current Imax(8/20) µs 100 kA
Max. backup fuse with V-type through wiring 125 A (gG)
Impulse discharge current (10/350) µs, charge 12.5 As
Maximum continuous operating voltage MCOV (L-G) 264 V AC
Maximum continuous operating voltage MCOV (L-L) 528 V AC
Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 1.5 kV
Impulse discharge current (10/350) µs, peak value limp 25 kA
Impulse discharge current (10/350) µs, specific energy 160 kJ/Ω

Descrição do produto

Combination of pluggable lightning and surge arresters, according to type 1+2/class I+II, for two-phase power grids, with combined PE and N routing in one conductor (L1, L2, PEN).
Principais características
  • Qualidade de nível industrial
  • Em conformidade com a RoHS
  • Certificado CE
  • Garantia de 1 ano

Documentos do produto

Ficha de dados

Especificações técnicas e dados de desempenho

Manual do Usuário

Guia de instalação e operação

Top