Em estoque Produto em alta
FRONT 2,5-H/SA 5/ 3
FRONT 2,5-H/SA 5/ 3 1700121 PHOENIX CONTACT PCB terminal block
$3.73
USD
2717 em estoque
Especificações principais
:
0.2 mm² / flexible / > 10 N
Note:
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Type:
PC terminal block can be aligned
Pitch:
5 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Type | PC terminal block can be aligned |
| Pitch | 5 mm |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 17.5 mm |
| Height [h] | 22 mm |
| Length [l] | 19.5 mm |
| Pin layout | Linear pinning |
| Pin spacing | 5 mm |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Product line | COMBICON Terminals M |
| Product type | Printed circuit board terminal |
| Hole diameter | 1.2 mm |
| Mounting type | Wave soldering |
| Specification | IEC 60999-1:1999-11 |
| Number of rows | 1 |
| Pin dimensions | 0.8 x 0.8 mm |
| Product family | FRONT 2,5-H/SA 5 |
| Color (Housing) | green (6021) |
| Test directions | X-, Y- and Z-axis |
| Article revision | 08 |
| Contact material | Cu alloy |
| Installed height | 18.5 mm |
| Stripping length | 9 mm |
| Time of exposure | 5 s |
| Connection method | Front screw connection |
| Tightening torque | 0.4 Nm ... 0.5 Nm |
| Type of packaging | packed in cardboard |
| Nominal current IN | 24 A |
| Nominal voltage UN | 400 V |
| Dimensional drawing | |
| Insulating material | PA |
| Number of positions | 3 |
| Number of potentials | 3 |
| Rated voltage (II/2) | 630 V |
| Drive form screw head | Slotted |
| Nominal cross section | 2.5 mm² |
| Number of connections | 3 |
| Rated voltage (III/2) | 400 V |
| Rated voltage (III/3) | 250 V |
| Solder pin length [P] | 3.5 mm |
| Test duration per axis | 2.5 h |
| Surface characteristics | hot-dip tin-plated |
| Insulating material group | I |
| Solder pins per potential | 2 |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 4 kV |
| Conductor cross section AWG | 24 ... 14 |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (III/3) | 4 kV |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 630 V |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Rated insulation voltage (III/2) | 400 V |
| Rated insulation voltage (III/3) | 250 V |
| minimum creepage distance (II/2) | 3.2 mm |
| Requirement temperature-rise test | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| minimum creepage distance (III/2) | 3 mm |
| minimum creepage distance (III/3) | 3.2 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface soldering area (top layer) | Tin (4 - 8 µm Sn) |
| Metal surface terminal point (top layer) | Tin (4 - 8 µm Sn) |
| 2 conductors with same cross section, solid | 0.2 mm² ... 0.75 mm² |
| Insulation resistance, neighboring positions | > 5 MΩ |
| 2 conductors with same cross section, flexible | 0.2 mm² ... 0.75 mm² |
| minimum clearance value - non-homogenous field (II/2) | 3 mm |
| minimum clearance value - non-homogenous field (III/2) | 3 mm |
| minimum clearance value - non-homogenous field (III/3) | 3 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm² / solid / > 10 N |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.34 mm² |
Descrição do produto
Terminal block for printed circuit board, nominal current: 24 A, nominal voltage (III/2): 400 V, nominal section: 2.5 mm², number of potentials: 3, number of rows: 1, number of poles per row: 3, famil
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
