Em estoque Produto em alta
HVG-65-42B
HVG-65-42B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 1550mA. 65,1W, 25,2-42V. Dimming..
$0.00
USD
3941 em estoque
Especificações principais
Name:
HVG-65-42B
State:
Recommended Model
Format:
Box
Series:
HVG-65-B
Informações do fornecedor
MEANWELL
Produtos: 6448
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| Name | HVG-65-42B |
| State | Recommended Model |
| Format | Box |
| Series | HVG-65-B |
| Dimming | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Approvals | UL |
| Power (W) | 65,10 |
| Subformato | IP67 |
| Width (mm) | 61.50 |
| Height (mm) | 36.80 |
| AC input Max | 528,00 |
| AC input Min | 180,00 |
| Applications | Lighting |
| Manufacturer | MEAN WELL |
| Product type | LED Driver |
| Isolation (V) | 3.750,00 |
| Peak Power (W) | 65.1 |
| Input connector | Cable |
| Input frequency | 50 Hz, 60 Hz |
| Long/Background | 189.00 |
| Long Description | LED driver dimmable with phase input.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input range180-528Vca47-63Hz.Output in constant current1550mA.Range of output voltage with current mode constant25,2 to 42Vccaccording to demand load.Power:65,1 W.Efficiency typical:89.5 per cent.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class I with grounding.Factor corrector, power>0,98to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+80ºC.Dimensions (Length x Width x Height):189 x 61.5 x 36,8 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.The series HVG are LED drivers, class I grounded.You can also work in voltage mode constant giving a fixed voltage of 42V if the load is powered at constant voltage and does not overcome the maximum output power.With metal housing IP67. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Output connector | Cable |
| Type of Entry CA | Three-phase |
| Warranty (Years) | 5,00 |
| Country of Origin | China |
| Output current mA | One thousand five hundred fifty |
| Intensity of Minimum Output (mA) | 1.550,00 |
| Intensity of Output Maximum (mA) | 1.550,00 |
Descrição do produto
More details
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Detalhes técnicos
LED driver dimmable with phase input.
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
