Horário de atendimento: Segunda a sexta, das 9h às 18h.
IB IL 24 SEG/F-XC-PAC - IB IL 24 SEG/F-XC-PAC 2701163 PHOENIX CONTACT Inline terminal
Em estoque Produto em alta

IB IL 24 SEG/F-XC-PAC

IB IL 24 SEG/F-XC-PAC 2701163 PHOENIX CONTACT Inline terminal

$0.00 USD
3064 em estoque
Especificações principais
: 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
Fuse: SI 5 x 20 6, 300 AT (in scope of delivery)
Type: modular
Depth: 71.5 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico

Especificações técnicas

Parâmetro Valor
5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
Fuse SI 5 x 20 6, 300 AT (in scope of delivery)
Type modular
Depth 71.5 mm
Width 12.2 mm
Height 119.8 mm
Current draw max. 8 A (nominal value)
Product type I/O component
Test section 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min.
ID code (hex) none
Mounting type DIN rail mounting
ID code (dec.) none
Product family Inline
Supply voltage 24 V DC
Connection name Inline connector
Register length 0 bit
Article revision 01
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Stripping length 8 mm
Connection method Inline data jumper
Protective circuit Overload protection, short-circuit protection in the segment circuit; Fuse 5 x 20 with 6.3 A, slow-blowFuses with other values can also be used. The maximum fuse value is 8 A.For fuses with a value greater than 2 A, only slow-blow fuses may be used.
Transmission speed 500 kbps / 2 Mbps (Can be used in Inline stations with these transmission speeds)
Dimensional drawing
Note on application Only for industrial use
Degree of protection IP20
Number of interfaces 2
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
GRP_Temperature class T2 (-40 °C ... 55 °C, EN 50155)
Communications power UL 7.5 V DC
Required parameter data 0 Byte
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section AWG 28 ... 16
Required configuration data 0 Byte
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Ambient temperature (operation) -25 °C ... 55 °C (Standard)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Permissible humidity (operation) 10 % ... 95 % (according to DIN EN 61131-2)
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (storage/transport) 10 % ... 95 % (according to DIN EN 61131-2)

Descrição do produto

Inline segment terminal, variant for extreme conditions, complete with accessories (connector and marking surface), 24 V DC, with fuse
Principais características
  • Qualidade de nível industrial
  • Em conformidade com a RoHS
  • Certificado CE
  • Garantia de 1 ano

Documentos do produto

Ficha de dados

Especificações técnicas e dados de desempenho

Manual do Usuário

Guia de instalação e operação

Top