Em estoque Produto em alta
IB IL AO 2/UI-XC-PAC
IB IL AO 2/UI-XC-PAC 2701389 PHOENIX CONTACT Inline terminal
$0.00
USD
4021 em estoque
Especificações principais
:
Transient protection; Suppressor diode
Type:
modular
Depth:
71.5 mm
Width:
12.2 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| Transient protection; Suppressor diode | |
| Type | modular |
| Depth | 71.5 mm |
| Width | 12.2 mm |
| Height | 119.8 mm |
| Output name | Analog outputs |
| Current draw | max. 65 mA |
| Data formats | IB IL, S7-compatible |
| Product type | I/O component |
| ID code (hex) | 5B |
| Mounting type | DIN rail mounting |
| ID code (dec.) | 91 |
| Product family | Inline |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Connection name | Inline connector |
| Register length | 64 bit |
| Article revision | 03 |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Stripping length | 8 mm |
| Connection method | Inline data jumper |
| Length code (dec) | 04 |
| Length code (hex) | 04 |
| Number of outputs | 2 |
| Scope of delivery | including Inline connector and labeling field |
| Input address area | 8 Byte |
| Note on dimensions | Housing dimensions |
| Protective circuit | Short-circuit and overload protection; Electronic |
| Special properties | Extreme conditions version |
| Transmission speed | 500 kbps |
| D/A conversion time | typ. 10 µs |
| Dimensional drawing | |
| Note on application | Only for industrial use |
| Output address area | 8 Byte |
| Process data update | bus-synchronous |
| Degree of protection | IP20 |
| Diagnostics messages | Failure of the internal I/O supply I/O error message sent to the bus coupler |
| Number of interfaces | 2 |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Process data channel | 64 bit |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Transmission physics | Copper |
| Connection technology | 2-conductor |
| Current output signal | 0 mA ... 20 mA |
| Voltage output signal | 0 V ... 10 V |
| Required parameter data | 10 Byte |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| D/A converter resolution | 12 bit |
| Permissible cable length | max. 250 m (The specifications refer to nominal operation after complying with installation instructions. The specifications refer to the following reference cable type: Shielded power station cable: LiYCY; 2 x 2 x 0,5 mm²; VDE0812) |
| Conductor cross section AWG | 28 ... 16 |
| Required configuration data | 5 Byte |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Ambient temperature (operation) | -25 °C ... 55 °C (Standard) |
| Load/output load current output | ≤ 450 Ω |
| Load/output load voltage output | > 1 kΩ |
| Representation of output values | 12 bits (11 bits + sign bit) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Note regarding the connection technology | shielded |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Test voltage: 7.5 V supply (bus logic)/functional ground | 500 V AC, 50 Hz, 1 min. |
| Test voltage: 24 V analog supply (analog I/O)/functional ground | 500 V AC, 50 Hz, 1 min. |
| Test voltage: 7.5 V supply (bus logics)/24 V analog supply (analog I/O) | 500 V AC, 50 Hz, 1 min. |
Descrição do produto
Inline, Analog output terminal, Analog outputs: 2, 0 V ... 10 V, -10 V ... 10 V, 0 mA... 20 mA, 4 mA... 20 mA, -20 mA... 20 mA, connection technology: 2 conductors, transmission rate on the local bus:
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
