Horário de atendimento: Segunda a sexta, das 9h às 18h.
PSI-MOS-PROFIB/FO 660 E - PSI-MOS-PROFIB/FO 660 E 2708290 PHOENIX CONTACT FO converters
Em estoque Produto em alta

PSI-MOS-PROFIB/FO 660 E

PSI-MOS-PROFIB/FO 660 E 2708290 PHOENIX CONTACT FO converters

$0.00 USD
3155 em estoque
Especificações principais
GTIN: 4017918973995
Orderkey: 2708290
Catalog page: Page 325 (C-6-2017)
Depth (Note): 106 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico

Especificações técnicas

Parâmetro Valor
GTIN 4017918973995
Orderkey 2708290
Catalog page Page 325 (C-6-2017)
Depth (Note) 106 mm
Packing unit 1 pc
Width (Note) 35 mm
Height (Note) 99 mm
Country of origin DE (Germany)
(Digital outputs) Class I, Div. 2, Groups A, B, C, D
(Serial interface) PCF fiber
Custom tariff number 85176200
(Ambient conditions) Class I, Div. 2, Groups A, B, C, D
Altitude (Dimensions) 5000 m (For restrictions see manufacturer's declaration)
ATEX (Digital outputs)  II 3 G Ex nA nC IIC T4 Gc X
(Optical interface FO) 42 V AC
Shock (Digital outputs) 15g in all directions in acc. with IEC 60068-2-27
Interface (Power supply) PROFIBUS
Signal (Digital outputs) ± 1 kV
ATEX (Ambient conditions)  II 3 G Ex nA nC IIC T4 Gc X (Please follow the special installation instructions in the documentation!)
MTBF (Ambient conditions) 324 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
MTTF (Ambient conditions) 243 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day))
Color (Ambient conditions) green
Comments (Digital outputs) Criterion B
Interface 1 (Power supply) PROFIBUS acc. to IEC 61158, RS-485 2-wire, half duplex, automatic control
Connection method (General) COMBICON plug-in screw terminal block
Noise immunity (Dimensions) EN 61000-6-2:2005
(Standards and Regulations) For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
DNV GL-EMC (Digital outputs) B
Conformance (Digital outputs) CE-compliant
Operating mode (Power supply) Semi-duplex
Test result (Digital outputs) 15g, 11 ms period, half-sine shock pulse
Wavelength (Serial interface) 660 nm
Bit delay (Ambient conditions) ≤ 1 bit
Supply voltage range (General) 18 V DC ... 30 V DC
Type of test (Digital outputs) Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Net weight (Ambient conditions) 241.9 g
Conformance (Ambient conditions) CE-compliant
Connection method (Power supply) D-SUB-9 female connector
Noise emission (Digital outputs) EN 55011
Noise immunity (Digital outputs) EN 61000-6-2:2005
Nominal supply voltage (General) 24 V DC (With UL approval)
UL, USA/Canada (Digital outputs) Class I, Zone 2, AEx nc IIC T5
DNV GL-Humidity (Digital outputs) A
Degree of protection (Dimensions) IP20
File format/coding (Power supply) UART (11 Bit, NRZ)
DNV GL-Enclosure (Digital outputs) Required protection according to the Rules shall be provided upon installation on board
DNV GL-Vibration (Digital outputs) A
Max. current consumption (General) 130 mA
Noxious gas test (Digital outputs) ISA-S71.04-1985 G3 Harsh Group A
Output name (Optical interface FO) Relay output
Transmission length (Power supply) ≤ 1200 m (depending on the data rate, with shielded, twisted pair data cable)
Transmission medium (Power supply) Copper
Contact discharge (Digital outputs) ± 6 kV
Noise emission (Ambient conditions) EN 55011
UL, USA/Canada (Ambient conditions) Class I, Zone 2, AEx nc IIC T5
Connection method (Serial interface) F-SMA
DNV GL-Temperature (Digital outputs) B
Weight per Piece (excluding packing) 241.900 g
Housing material (Ambient conditions) PA 6.6-FR
Overrange receiver (Serial interface) -3 dBm (980/1000 µm)
Typical current consumption (General) 100 mA (24 V DC)
China RoHS (Standards and Regulations) Environmentally Friendly Use Period = 50
REACh SVHC (Standards and Regulations) Lead 7439-92-1
Transmission medium (Serial interface) Polymer fiber
Data direction switching (Power supply) Automatic control
Standards/regulations (Digital outputs) EN 55011
Vibration (operation) (Digital outputs) in acc. with IEC 60068-2-6: 5g, 150 Hz
Number of outputs (Optical interface FO) 1
Serial transmission speed (Power supply) ≤ 12 Mbps
Transmission protocol (Serial interface) Protocol-transparent to the RS-485 interface
Electrical isolation (Ambient conditions) VCC // RS-485
Output description (Optical interface FO) Alarm output
Bit distortion, input (Ambient conditions) ± 35 % (permitted)
Bit distortion, output (Ambient conditions) < 6.25 %
Ambient temperature (operation) (Dimensions) -20 °C ... 60 °C
Permissible humidity (operation) (Dimensions) 30 % ... 95 % (non-condensing)
Transmit capacity, minimum (Serial interface) -3 dBm (980/1000 µm)
Utilization restriction (Key Commercial Data) 1
Conductor cross section AWG max. (Power supply) 14
Conductor cross section AWG min. (Power supply) 24
Electromagnetic compatibility (Digital outputs) Conformance with EMC Directive 2014/30/EU
Minimum receiver sensitivity (Serial interface) -30 dBm
Maximum switching voltage (Optical interface FO) 60 V DC
Conductor cross section solid max. (Power supply) 2.5 mm²
Conductor cross section solid min. (Power supply) 0.2 mm²
Connection in acc. with standard (Digital outputs) CUL
Electromagnetic compatibility (Ambient conditions) Conformance with EMC Directive 2014/30/EU
Limiting continuous current (Optical interface FO) 0.46 A
Ambient temperature (storage/transport) (Dimensions) -40 °C ... 85 °C
Conductor cross section flexible max. (Power supply) 2.5 mm²
Conductor cross section flexible min. (Power supply) 0.2 mm²
Test voltage data interface/power supply (Ambient conditions) 1.5 kVrms(50 Hz, 1 min.)
Transmission length incl. 3 dB system reserve (Serial interface) 70 m (With F-P 980/1000 230 dB/km with quick mounting connector)
Free from substances that could impair the application of coating (Digital outputs) according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard

Descrição do produto

Fiber Optic Converter with Integrated Optical Diagnostics, Alarm Contact, for PROFIBUS up to 12 MBit/s, Terminal Equipment with a Fiber Optic Interface (FSMA), 660 nm, for Polymer/PCF Fiber Cables
Principais características
  • Qualidade de nível industrial
  • Em conformidade com a RoHS
  • Certificado CE
  • Garantia de 1 ano

Documentos do produto

Ficha de dados

Especificações técnicas e dados de desempenho

Manual do Usuário

Guia de instalação e operação

Top