Em estoque Produto em alta
PSR-M-B2-XC-SDI8-SDO4-DO4-PI
PSR-M-B2-XC-SDI8-SDO4-DO4-PI 1337849 PHOENIX CONTACT Configurable safety module (basic module), 8 safe input..
$0.00
USD
3975 em estoque
Especificações principais
:
Light grid
Note:
via the PSR-TBUS DIN rail connector
Depth:
113.6 mm
Shock:
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| Light grid | |
| Note | via the PSR-TBUS DIN rail connector |
| Depth | 113.6 mm |
| Shock | 10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction) |
| Width | 22.61 mm |
| Height | 107.74 mm |
| Voltage | 24 V DC (via A1) |
| pluggable | yes |
| Interfaces | DIN rail TBUS for connection to the master module, not supplied as standard |
| Application | Emergency stop |
| Certificate | XXX |
| Designation | A1/A2 |
| Filter time | typ. 5 ms (in the event of voltage dips at Us) |
| Test pulses | < 235 µs (Test pulse width of low test pulses) |
| Cable length | max. 100 m |
| Product type | Safety device |
| Restart time | min. 5 s (Boot time) |
| Mounting type | DIN rail mounting |
| Response time | see user manual |
| Identification | CE-compliant |
| Inrush current | 9.16 A (Δt = 0.5 ms at Us) |
| Output voltage | < 0.3 V (Low state) |
| Status display | 1 x LED (green), 1 x LED (orange), 1 x LED (blue) |
| Leakage current | < 500 µA (Low state) |
| Error indication | 2 x LED (red) |
| Housing material | Polyamide PA non-reinforced |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Number of inputs | 8 |
| Stripping length | 10 mm |
| Connection method | Push-in connection |
| Mounting position | vertical or horizontal |
| Number of outputs | 4 |
| Output description | Safety-related digital outputs |
| Protective circuit | Serial protection against polarity reversal |
| Current consumption | typ. 3.7 mA (typically with US) |
| Discharging circuit | Yes, internal |
| Max. inductive load | See "Protective circuit" |
| Switching frequency | max. 1/4 x tCycle[Hz] |
| Degree of protection | IP20 |
| Max. capacitive load | max. 820 nF |
| Assembly instructions | Observe derating |
| Number of connections | 1 |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g |
| Maximum inrush current | 1.1 A (Δt = 3 s at Us) |
| Nominal operating mode | 100% operating factor |
| Nominal output voltage | 24 V DC (Supply via A1) |
| Performance level (PL) | e (2-channel wiring) |
| Power consumption at US | typ. 1.32 W (Outputs inactive) |
| Description of the input | Safety-related digital inputs |
| Rated insulation voltage | 250 V AC |
| Short-circuit protection | no |
| Operating voltage display | 1 x green LED |
| Conductor cross-section AWG | 24 ... 16 |
| Limiting continuous current | 400 mA (per channel) |
| Nominal output voltage range | 18.6 V DC ... 28.2 V DC (US- 0,7 V) |
| Safety Integrity Level (SIL) | 3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Input current range "0" signal | < 0.2 mA |
| Input voltage range "0" signal | 0 V DC ... 5 V DC (for safe Off) |
| Input voltage range "1" signal | 11 V DC ... 28.8 V DC |
| Rated surge voltage/insulation | See section “Insulation coordination” |
| Ambient temperature (operation) | -10 °C ... 70 °C (observe derating) |
| Rated control supply current IS | typ. 55 mA (Outputs inactive) |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Output voltage when switched off | max. 0.1 V |
| Ambient temperature (storage/transport) | -20 °C ... 85 °C |
| Rated control circuit supply voltage US | 19.2 V DC ... 28.8 V DC |
| Min. degree of protection of inst. location | IP54 |
| Max. permissible humidity (storage/transport) | 95 % (non-condensing) |
| Max. permissible overall conductor resistance | max. 1.2 kΩ (Input and reset circuit at US) |
| Max. permissible relative humidity (operation) | 95 % (non-condensing) |
| Maximum power dissipation for nominal condition | 7.48 W (with max. permissible load) |
Descrição do produto
Configurable safety module (basic module), 8 safe inputs, 4 safe outputs, 4 reset inputs or 4 signal outputs, 4 clock outputs, can be extended via TBUS, up to SIL 3, Cat. 4/PL e, plug-in Push-in termi
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
