Em estoque Produto em alta
PSR-SPP-24UC/URM/3X1/3X2
PSR-SPP- 24UC/URM/3X1/3X2 2981842 PHOENIX CONTACT Coupling relay
$0.00
USD
3098 em estoque
Especificações principais
:
High demand
Depth:
112 mm
Shock:
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
Width:
22.5 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| High demand | |
| Depth | 112 mm |
| Shock | 15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.) |
| Width | 22.5 mm |
| Height | 114.5 mm |
| Category | 1 |
| pluggable | yes |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Application | Safe switch off |
| Certificate | CE-compliant |
| Output fuse | 10 A gL/gG (N/O contact) |
| Product type | Coupling relay |
| Restart time | < 1 s (Boot time) |
| Mounting type | DIN rail mounting |
| Recovery time | < 500 ms |
| Stop category | 0 |
| Inrush current | typ. 350 mA DC (Δt s) |
| Product family | PSRclassic |
| Color (Housing) | yellow (RAL 1018) |
| Article revision | 06 |
| Contact material | AgSnO2 |
| Housing material | Polyamide |
| Maximum altitude | max. 2000 m (Above sea level) |
| Stripping length | 8 mm |
| Connection method | Push-in connection |
| Mounting position | vertical or horizontal |
| Sq. Total current | 48 A2 |
| Tightening torque | 0.6 Nm |
| Protective circuit | Surge protection; Suppressor diode |
| Switching capacity | min. 50 mW |
| Input voltage range | 20.4 V AC/DC ... 26.4 V AC/DC |
| Note on application | Only for industrial use |
| Degree of protection | IP20 |
| Typical release time | typ. 15 ms (when controlled via A1) |
| Standards/regulations | DIN EN 50178 |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.) |
| Contact switching type | 3 enabling current paths |
| Maximum inrush current | 8 A |
| Nominal operating mode | 100% operating factor |
| Performance level (PL) | c |
| Inrush current, minimum | 10 mA |
| Mechanical service life | 10x 106cycles |
| Power consumption at US | typ. 1.08 W |
| Rated insulation voltage | 250 V |
| Maximum switching voltage | 230 V AC/DC (Observe the load curve) |
| Minimum switching voltage | 5 V AC/DC |
| Operating voltage display | 1 x green LED |
| Typ. starting time with Us | typ. 15 ms (when controlled via A1) |
| Conductor cross-section AWG | 24 ... 16 |
| Limiting continuous current | 6 A (N/O contact) |
| Maximum switching frequency | 0.5 Hz |
| Safety Integrity Level (SIL) | 1 |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Rated surge voltage/insulation | 4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.) |
| Ambient temperature (operation) | -20 °C ... 55 °C |
| Rated control supply current IS | typ. 45 mA |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Interrupting rating (ohmic load) max. | For additional values, see load curve |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Rated control circuit supply voltage US | 20.4 V AC/DC ... 26.4 V AC/DC |
| Min. degree of protection of inst. location | IP54 |
| Maximum interrupting rating (inductive load) | 48 W (N/O contact, 24 V DC, τ = 40 ms) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximum power dissipation for nominal condition | 6.11 W (at UB= 26.4 V DC, US= 24 V, IS= 45 mA, n = 1, IL² = 48 A², Rcontact= 0.1 ) |
| Switching capacity in accordance with IEC 60947-5-1 | 5 A (24 V (DC13)) |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
Descrição do produto
Safe coupling relay with forced-conduction contacts, 3 NO contacts, 3 NC contacts, width: 22.5 mm, plug-in push-in terminal block
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
