Em estoque Produto em alta
PV-SET 3ST/1000DC/3MPP-SPD-SC
PV-SET 3ST/1000DC/3MPP-SPD-SC 2801531 PHOENIX CONTACT Surge protection device set
$0.00
USD
3790 em estoque
Especificações principais
:
PV T2
Note:
2011
Type:
Installation housing
Depth:
142 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| PV T2 | |
| Note | 2011 |
| Type | Installation housing |
| Depth | 142 mm |
| Width | 300 mm |
| Height | 300 mm |
| Screw thread | M2 |
| Mounting type | Surface/Wall mounting |
| Set comprises | 1774674 PV-CF-S 2,5-6 (+) |
| Cover material | Polycarbonate, transparent |
| Impact strength | IK08 |
| Horizontal pitch | 14 Div. |
| Housing material | Polycarbonate, glass-fiber-reinforced |
| Pollution degree | 2 |
| Protection class | II |
| Response time tA | ≤ 25 ns |
| Stripping length | 7 mm |
| Connection method | MC 1,5/3 |
| Tightening torque | 2 lbf-in. ... 4 lbf-in. |
| Ambient conditions | A, B |
| Connector material | PA |
| Nominal current IN | 25 A DC (per MPP) |
| Switching function | Changeover contact, 1-pos. |
| Direction of action | (L+)-PE & (L-)-PE & (L+)-(L-) |
| Degree of protection | IP65 |
| Overvoltage category | III |
| Residual current IPE | ≤ 25 µA |
| Rated load current IL | 80 A DC |
| Standards/regulations | EN 50539-11 |
| Tightening torque, min | 0.25 Nm |
| IEC test classification | PV T1 |
| Standards/specifications | IEC 61439-2 |
| Conductor cross section AWG | 30 ... 14 (UL) |
| Max. operating current Imax | 1.5 A AC (250 V AC) |
| Open circuit voltage UOCSTC | 830 V DC (Solar generator) |
| Response time tA(L+) - (L-) | ≤ 25 ns |
| Response time tA(L+/L-) - PE | ≤ 25 ns |
| Short-circuit current ISCSTC | 25 A DC (per MPP) |
| Standby power consumption PC | ≤ 25 mVA |
| Surge protection fault message | optical |
| Ambient temperature (operation) | -30 °C ... 55 °C |
| Recommended backup fuse maximum | not required |
| Maximum operating voltage UmaxDC | 30 V DC |
| Maximum operating voltage Umax.AC | 250 V AC |
| Short-circuit current rating ISCPV | 32 A DC (per MPP) |
| Conductor cross section, rigid max. | 1.5 mm² |
| Conductor cross section, rigid min. | 0.14 mm² |
| Max. backup fuse with branch wiring | not required |
| Rated surge voltage resistance Uimp | 6 kV |
| Conductor cross section flexible max. | 1.5 mm² |
| Conductor cross section flexible min. | 0.14 mm² |
| Flammability rating according to UL 94 | V2 (Gehäuse / Deckel) |
| Nominal discharge current In(8/20) µs | 15 kA |
| Voltage protection level Up(L+) - (L-) | ≤ 3.5 kV |
| Voltage protection level Up(L+/L-) - PE | ≤ 3.5 kV |
| Maximum discharge current Imax(8/20) µs | 40 kA |
| Total discharge current Itotal(8/20) µs | 40 kA |
| Total discharge current Itotal(10/350) µs | 5 kA |
| Impulse discharge current (10/350) µs, peak value limp | 5 kA |
Descrição do produto
Lightning and surge arrester in IP65 housing for protecting the DC side of an inverter with three MPP trackers up to 1000 V DC, connection via SUNCLIX plug/socket, plug-in varistors with thermal disco
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
