Horário de atendimento: Segunda a sexta, das 9h às 18h.
REL-FO/LD-24DC/2X21/MS - 1308298 PHOENIX CONTACT REL-FO/LD-24DC/2X21/MS Single Relay
Em estoque Produto em alta

REL-FO/LD-24DC/2X21/MS

1308298 PHOENIX CONTACT REL-FO/LD-24DC/2X21/MS Single Relay

$0.00 USD
4746 em estoque
Especificações principais
: 240 W (30 V DC)
Depth: 34 mm
Width: 13 mm
Height: 31.1 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico

Especificações técnicas

Parâmetro Valor
240 W (30 V DC)
Depth 34 mm
Width 13 mm
Height 31.1 mm
General Do not use to separate SELV/PELV circuits from other circuits, because safe isolation is not guaranteed. (applies to the optocoupler variants)
Altitude ≤ 2000 m
Insulation Basic insulation
Relay type Electromechanical relay
Product type Single relay
Operating mode 100% operating factor
Product family ESSENTIAL edition
Status display Yellow LED
Coil resistance 1080 Ω ±10 %
Test voltage () 1 kVrms(50 Hz, 1 min., open contact)
Contact material AgSnO
Drive (polarity) polarized
Pollution degree 3
Connection method FASTON connection
Cross section AWG (converted acc. to IEC)
Mounting position any
Drive and function monostable
Protective circuit Freewheeling diode
Input voltage range 16.8 V DC ... 26.4 V DC
Rated surge voltage 2.5 kV
Overvoltage category II
Typical release time 9 ms
Standards/regulations IEC 61810-1
Typical response time 9 ms
Contact switching type 2 changeover contacts
Maximum inrush current 16 A (20 ms, N/O contacts)
Type of switch contact Single contact
Inrush current, minimum 10 mA (5 V)
Mechanical service life approx. 5x 107cycles
Nominal input voltage UN 24 V DC
Rated insulation voltage 250 V AC
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (10 mA)
Limiting continuous current 8 A
Typical input current at UN 24 mA
Degree of protection (Relay) RT II (Relay)
Input power dissipation for UN 0.58 W
Test voltage (Winding/contact) 5 kVrms(50 Hz, 1 min., winding/contact)
Ambient temperature (operation) -40 °C ... 70 °C
Interrupting rating (ohmic load) max. 192 W (24 V DC)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Degree of protection (Installation location) IP54 (Installation location)
Maximum power dissipation for nominal condition 0.64 W
Test voltage (Changeover contact/changeover contact) 3 kVrms(50 Hz, 1 min., changeover contact/changeover contact)

Descrição do produto

Plug-in miniature relay with mechanical switching position indicator, FASTON connection, 2 changeover contacts, status display: Yellow LED, Freewheeling diode, Input voltage: 24 V DC
Principais características
  • Qualidade de nível industrial
  • Em conformidade com a RoHS
  • Certificado CE
  • Garantia de 1 ano

Documentos do produto

Ficha de dados

Especificações técnicas e dados de desempenho

Manual do Usuário

Guia de instalação e operação

Top