Em estoque Produto em alta
REL-MR-24DC/ 1ICT
REL-MR- 24DC/ 1ICT 2987338 PHOENIX CONTACT Pluggable miniature power relay, with tungsten pre-contact for hi..
$0.00
USD
3644 em estoque
Especificações principais
GTIN:
4046356491112
Orderkey:
2987338
(General):
EN 61810-1
(Drawings):
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| GTIN | 4046356491112 |
| Orderkey | 2987338 |
| (General) | EN 61810-1 |
| (Drawings) | |
| (Coil side) | 6 A (at 250 V, AC15) |
| Packing unit | 1 pc |
| Depth (Drawings) | 15.7 mm |
| UNSPSC 11 (ETIM) | 39121515 |
| Width (Drawings) | 12.7 mm |
| Country of origin | AT (Austria) |
| ETIM 2.0 (eCl@ss) | EC000196 |
| ETIM 3.0 (eCl@ss) | EC000196 |
| ETIM 4.0 (eCl@ss) | EC000196 |
| ETIM 5.0 (eCl@ss) | EC001437 |
| ETIM 6.0 (eCl@ss) | EC001437 |
| ETIM 7.0 (eCl@ss) | EC001437 |
| Height (Drawings) | 29 mm |
| UNSPSC 13.2 (ETIM) | 39121515 |
| UNSPSC 18.0 (ETIM) | 39122334 |
| UNSPSC 19.0 (ETIM) | 39122334 |
| UNSPSC 20.0 (ETIM) | 39122334 |
| UNSPSC 21.0 (ETIM) | 39122334 |
| UNSPSC 6.01 (ETIM) | 30211916 |
| UNSPSC 12.01 (ETIM) | 39121515 |
| Custom tariff number | 85364190 |
| Insulation (General) | Safe isolation, reinforced insulation |
| UNSPSC 7.0901 (ETIM) | 39121515 |
| Contact type (Coil side) | 1 N/O contact |
| Pollution degree (General) | 3 |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Coil side) | AgSnO |
| eCl@ss 4.0 (Classifications) | 27371104 |
| eCl@ss 4.1 (Classifications) | 27371104 |
| eCl@ss 5.0 (Classifications) | 27371001 |
| eCl@ss 5.1 (Classifications) | 27371001 |
| eCl@ss 6.0 (Classifications) | 27371001 |
| eCl@ss 7.0 (Classifications) | 27371001 |
| eCl@ss 8.0 (Classifications) | 27371601 |
| eCl@ss 9.0 (Classifications) | 27371601 |
| Maximum altitude (Dimensions) | ≤ 2000 m |
| Operating mode (Contact side) | 100% operating factor |
| Rated surge voltage (General) | 6 kV |
| Dimensional drawing (Drawings) | |
| Overvoltage category (General) | III |
| Switching capacity (Coil side) | 2 A (at 24 V, DC13) |
| Standards/regulations (General) | EN 50178 |
| Mounting position (Contact side) | any |
| Degree of protection (Dimensions) | RT II |
| Maximum inrush current (Coil side) | 165 A (20 ms) |
| Min. switching current (Coil side) | 100 mA (at 12 V DC) |
| Rated insulation voltage (General) | 250 V AC |
| Type of switch contact (Coil side) | Single contact |
| Switching capacity min. (Coil side) | 1200 mW |
| Assembly instructions (Contact side) | Can be aligned without spacing (> 70 °C ≥ 2.5 mm) |
| Coil resistance (Ambient conditions) | 1440 Ω ±10 % (20 °C) |
| Weight per Piece (excluding packing) | 0.000 g |
| Maximum switching voltage (Coil side) | 250 V AC/DC |
| Minimum switching voltage (Coil side) | 12 V (100 mA) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Mechanical service life (Contact side) | 3x 107cycles |
| Limiting continuous current (Coil side) | 16 A |
| Typical release time (Ambient conditions) | 3 ms |
| Typical response time (Ambient conditions) | 8 ms |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 85 °C |
| Nominal input voltage UN (Ambient conditions) | 24 V DC |
| Typical input current at UN (Ambient conditions) | 17 mA |
| Interrupting rating (ohmic load) max. (Coil side) | 384 W (at 24 V DC) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Drilling diagrama = pitch division 2.5 mm (Drawings) | |
| Test voltage relay winding/relay contact (Contact side) | 5 kV AC (50 Hz, 1 min.) |
| Input voltage range in reference to UN (Ambient conditions) | see diagram |
| Power dissipation for nominal condition (Ambient conditions) | 0.41 W |
Descrição do produto
Pluggable miniature power relay, with tungsten advance contact for high input currents up to 800 A Peak, 1 normally open contact, input voltage 24 V DC
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Detalhes técnicos
Drilling diagrama = pitch division 2.5 mm
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
