Em estoque Produto em alta
REL-OR3/LDP-125DC/3X21
REL-OR3/LDP-125DC/3X21 2909207 PHOENIX CONTACT Plug-in octal relays with power contacts, 3 changeover contac..
$0.00
USD
4136 em estoque
Especificações principais
GTIN:
4055626360171
Orderkey:
2909207
(Drawings):
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
(Coil side):
2500 VA (for 250 V AC)
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| GTIN | 4055626360171 |
| Orderkey | 2909207 |
| (Drawings) | Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed. |
| (Coil side) | 2500 VA (for 250 V AC) |
| Catalog page | Page 308 (C-5-2019) |
| Depth (Note) | 54.4 mm |
| Packing unit | 1 pc |
| Width (Note) | 35 mm |
| (Dimensions) | ≥ IP54 (Installation location) |
| Height (Note) | 35 mm |
| Note (Drawings) | The outputs are not suitable for switching different outer conductors. |
| Country of origin | PL (Poland) |
| ETIM 2.0 (eCl@ss) | EC001437 |
| ETIM 3.0 (eCl@ss) | EC001437 |
| ETIM 4.0 (eCl@ss) | EC001437 |
| ETIM 5.0 (eCl@ss) | EC001437 |
| ETIM 6.0 (eCl@ss) | EC001437 |
| ETIM 7.0 (eCl@ss) | EC001437 |
| (Connection data) | IEC 61810 |
| Custom tariff number | 85364900 |
| Minimum order quantity | 50 pc |
| Contact type (Coil side) | 3 PDTs |
| Connection method (General) | Plug connection |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Coil side) | AgNi |
| Insulation (Connection data) | Basic insulation |
| eCl@ss 5.0 (Classifications) | 27371601 |
| eCl@ss 5.1 (Classifications) | 27371601 |
| eCl@ss 6.0 (Classifications) | 27371601 |
| eCl@ss 7.0 (Classifications) | 27371601 |
| eCl@ss 8.0 (Classifications) | 27371601 |
| eCl@ss 9.0 (Classifications) | 27371601 |
| Maximum altitude (Dimensions) | ≤ 2000 m |
| Operating mode (Contact side) | 100% operating factor |
| Mounting position (Contact side) | any |
| Degree of protection (Dimensions) | RT I |
| Maximum inrush current (Coil side) | 30 A (20 ms, N/O contacts) |
| Min. switching current (Coil side) | 10 mA (at 24 V) |
| Pollution degree (Connection data) | 3 |
| Type of switch contact (Coil side) | Single contact |
| Status display (Ambient conditions) | Yellow LED |
| Test voltage PDT/PDT (Contact side) | 2.5 kVrms(50 Hz, 1 min.) |
| Weight per Piece (excluding packing) | 88.000 g |
| Maximum switching voltage (Coil side) | 250 V DC |
| Minimum switching voltage (Coil side) | 10 V (At 24 mA) |
| Rated surge voltage (Connection data) | 4 kV |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Mechanical service life (Contact side) | approx. 2x 107cycles |
| Overvoltage category (Connection data) | III |
| Limiting continuous current (Coil side) | 10 A |
| Protective circuit (Ambient conditions) | Damping diode |
| Standards/regulations (Connection data) | IEC 60664 |
| DiagramElectrical service life (Drawings) | |
| DiagramOperating voltage range (Drawings) | |
| Typical release time (Ambient conditions) | 20 ms |
| Motor load according to UL 508 (Coil side) | 1/2 HP, 240 V AC (N/O contact) |
| Rated insulation voltage (Connection data) | 250 V AC |
| Typical response time (Ambient conditions) | 18 ms |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 70 °C |
| Nominal input voltage UN (Ambient conditions) | 125 V DC |
| Voltage type for actuation (Ambient conditions) | DC |
| Typical input current at UN (Ambient conditions) | 14 mA |
| Interrupting rating (ohmic load) max. (Coil side) | 240 W (at 24 V DC) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Test voltage relay winding/relay contact (Contact side) | 2.5 kVrms(50 Hz, 1 min.) |
| Power dissipation for nominal condition (Ambient conditions) | 1.44 W |
Descrição do produto
Plug-in octal relays with power contacts, 3 switches, test key, free-flowing diode, mechanical switching position indication, polarity A1+, A2-, input voltage: 125 V DC
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Detalhes técnicos
DiagramOperating voltage range
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
