Em estoque Produto em alta
STEP3-PS/1AC/5DC/3/PT/USB-A
STEP3-PS/1AC/5DC/3/PT/USB-A 1335699 PHOENIX CONTACT Primary Switching Power Supplies, STEPPOWER, Push-in Con..
$53.87
USD
227 em estoque
Especificações principais
:
230 V AC
Depth:
61 mm
Input:
asymmetrical 2 kV (Test Level 3)
Width:
18 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| 230 V AC | |
| Depth | 61 mm |
| Input | asymmetrical 2 kV (Test Level 3) |
| Width | 18 mm |
| rigid | 0.2 mm² ... 2.5 mm² |
| Height | 90 mm |
| Output | asymmetrical 2 kV (Test Level 3) |
| Voltage | 10 V (Test Level 3) |
| Comments | Criterion A |
| Derating | > 50 °C ... 70 °C (2 % / K) |
| Position | 1.x |
| flexible | 0.2 mm² ... 2.5 mm² |
| Frequency | 50 Hz |
| Rise time | typ. 100 ms (UOut= 10 % ... 90 %) |
| EN 61010-1 | II (≤ 4000 m) |
| EN 62477-1 | III (≤ 2000 m) |
| Efficiency | > 81.5 % (120 V AC) |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Criterion C | Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. |
| Voltage dip | 70 % |
| rigid (AWG) | 24 ... 14 (Cu) |
| Crest factor | typ. 3.3 |
| Input/Output | asymmetrical |
| Product type | Power supply |
| Mounting type | DIN rail or direct mounting |
| No-load proof | yes |
| Identification | UL 1310 Class 2 Power Units |
| Inrush current | typ. 30 A (25 °C) |
| Noise emission | EN 55016 |
| Noise immunity | Immunity in accordance with EN 61000-6-2 (industrial) |
| Product family | STEP POWER |
| Switch-on time | typ. 2 s |
| Additional text | Class 3 |
| Frequency range | 0 kHz ... 2 kHz |
| Residual ripple | typ. 80 mVPP |
| Discharge in air | 8 kV (Test Level 3) |
| Horizontal pitch | 1 Div. (DIN 43880) |
| Housing material | Plastic |
| Maximum altitude | ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m) |
| Number of phases | 1.00 |
| Position marking | 1.1, 1.2 (L), 1.3, 1.4 (N) |
| Protection class | II (in closed control cabinet) |
| Signal threshold | > 0.9 x UN(UN= 5 V DC) (LED lights up green) |
| Stripping length | 10 mm (rigid/flexible/ferrule without plastic sleeve) |
| Connection method | Push-in connection |
| Contact discharge | 6 kV (Test Level 3) |
| Control deviation | < 1.5 % (Static load change 10 % ... 90 %) |
| Device mains fuse | 1.25 A internal (device protection), slow-blow |
| Mounting position | horizontal DIN rail NS 35, EN 60715 |
| Number of periods | 25 periods |
| Output power (PN) | 15 W |
| Shock (operation) | 18 ms, 30g, per spatial direction (IEC 60068-2-27) |
| Types of signaling | LED |
| Current consumption | 0.3 A (100 V AC) |
| Degree of pollution | 2 |
| Dimensional drawing | |
| Foot latch material | Polyamid |
| Input voltage range | 100 V AC ... 240 V AC -15 % ... +10 % |
| Short-circuit-proof | yes |
| Test field strength | 10 V/m (Test Level 3) |
| Connection in series | yes, for increased output voltage |
| Degree of protection | IP20 |
| Frequency range (fN) | 50 Hz ... 60 Hz ±10 % |
| Mains buffering time | typ. 18 ms (120 V AC) |
| Standard designation | Electrical safety |
| Assembly instructions | alignable: 0 mm horizontally, 30 mm vertically |
| Interference emission | Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial) |
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| Standards/regulations | EN 61000-3-2 |
| Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (IEC 60068-2-6) |
| Connection in parallel | yes, for increasing power and redundancy with diode |
| Nominal output voltage | 5 V DC |
| Discharge current to PE | < 0.25 mA |
| With protective coating | No |
| Conducted noise emission | EN 55016 |
| Standards/specifications | IEC 61010-1 (SELV) |
| MTBF (IEC 61709, SN 29500) | > 2428000 h (25 °C) |
| Feedback voltage resistance | ≤ 10 V DC |
| Nominal output current (IN) | 3 A |
| Supply system configuration | Star network (TN, TT, IT (PE)) |
| Power loss nominal load max. | < 3.4 W (230 V AC) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Inrush current integral (I2t) | typ. 0.14 A2s |
| Typical national grid voltage | 120 V AC |
| Voltage type of supply voltage | AC |
| Ambient temperature (operation) | -10 °C ... 70 °C (Derating: > 50 °C; 2 %/K) |
| Insulation voltage input/output | 4 kV AC (type test) |
| Installation distance right/left | 0 mm / 0 mm |
| Installation distance top/bottom | 30 mm / 30 mm |
| Maximum no-load power dissipation | < 0.1 W (230 V AC) |
| Minimum no-load power dissipation | < 0.1 W (120 V AC) |
| Environmental protection directive | RoHS Directive 2011/65/EU |
| Flammability rating according to UL 94 | V0 (Housing, terminal blocks, base latches) |
| Minimum nominal load power dissipation | < 3.5 W (120 V AC) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Recommended breaker for input protection | 6 A ... 16 A (Characteristics B, C, D, K) |
| flexible with ferrule with plastic sleeve | 0.2 mm² ... 1 mm² |
| Ambient temperature (start-up type tested) | -25 °C |
| flexible with ferrule without plastic sleeve | 0.5 mm² ... 1.5 mm² |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Protection against overvoltage at the output (OVP) | < 10 V DC |
Descrição do produto
Primary-switched power supply unit, STEP POWER, Push-in connection, DIN rail or direct mounting, Integrated cable groove with strain relief, input: 1-phase, output: 5 V DC / 3 A, USB-A up to 15 W
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
