Em estoque Produto em alta
USQ4A22P
USQ4A22P SQ4-A22-P PANASONIC Safety Liquid Leak Sensor, chemical liquids, Category 1, Plc, SIL1, PNP output,..
$0.00
USD
3441 em estoque
Especificações principais
Item:
Specifications
Cable:
0.1 mm24-core PFA cabtyre cable, 2 m6.562 ftlong
Weight:
Net weight: 45 g approxGross weight: 110 g approx
Details:
Sensor [For chemical liquid]
Informações do fornecedor
PANASONIC
Produtos: 4316
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| Item | Specifications |
| Cable | 0.1 mm24-core PFA cabtyre cable, 2 m6.562 ftlong |
| Weight | Net weight: 45 g approxGross weight: 110 g approx |
| Details | Sensor [For chemical liquid] |
| Product | Safety Liquid Leak Sensor [Control Category 4 PLe SIL3] |
| Material | Enclosure: PFA |
| Protection | IP65 / IP67 (IEC) |
| Part Number | SQ4-A22-P |
| Product name | Safety Liquid Leak Sensor [Control Category 4 PLe SIL3] SQ4 |
| Power voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Product Number | SQ4-A22-P |
| Sensing object | Sulfuric acid, Hydrochloric acid,Phosphoric acid, Ammonia, Fluorinert (Note 2), Galden (Note 2), Hydrofl uoric acid etc. (Note 3)(Note 1) Highly viscous liquid may not be stably detected.(Note 2) The agents mentioned above are examples. It may not be detected depending on viscosity the agent.Before using this device, check the detecting liquid and installation condition.(Note 3) Fluorinert is the world wide trademark of 3M. Galden is the registered trademark of Solvay. |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Emitting element | Infrared LED (modulated) |
| Ambient temperature | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed) (Note) Storage: -10 to +55 ℃+14 to +131 ℉(Note) Liquid being detected should be also kept within the rated ambient temperature range. |
| Current consumption | 30 mA or less |
| Utilization category | DC-12, DC-13 |
| Detection output(Leakage detection) | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: Same as the supply voltage (between detection output and +V)- Residual voltage: 2.5 V or less (at 50 mA source current) |
| Detection auxiliary output(Initial detection) | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: Same as the supply voltage (between detection auxiliary output and +V)- Residual voltage: 2.5 V or less (at 50 mA source current) |
| Detection output(Leakage detection):Response time | 10 ms or less |
| Detection output(Leakage detection):Output operation | ON when normal condition or initial detection, OFF when detection leakage or wrong installation |
| Detection auxiliary output(Initial detection):Response time | 50 ms or less |
| Detection output(Leakage detection):Short-circuit protection | Incorporated |
| Detection auxiliary output(Initial detection):Output operation | ON when normal condition, OFF when initial detection or accidental leakage |
| Detection auxiliary output(Initial detection):Short-circuit protection | Incorporated |
Descrição do produto
Safety Sensor liquid detection, chemical liquids, Category 1, Ple, SIL1, PNP, cable 2m
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
