Em estoque Produto em alta
VAL-MS 60
VAL-MS 60 2868020 PHOENIX CONTACT Type 2 surge arrester
$0.00
USD
3169 em estoque
Especificações principais
:
T2
Note:
2011
Type:
DIN rail module, two-section, divisible
Color:
black (RAL 9005)
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| T2 | |
| Note | 2011 |
| Type | DIN rail module, two-section, divisible |
| Color | black (RAL 9005) |
| Depth | 65.7 mm (incl. DIN rail 7.5 mm) |
| Width | 17.6 mm |
| Height | 89.8 mm |
| EN type | T2 |
| Altitude | ≤ 2000 m (amsl) |
| SPD Type | 4CA |
| Product type | Surge arrester |
| Screw thread | M5 |
| Mounting type | DIN rail: 35 mm |
| Material group | I |
| Product family | VALVETRAB MS |
| Nominal voltage | 60 V AC |
| Article revision | 13 |
| Horizontal pitch | 1 Div. |
| Housing material | PA 6.6 |
| Pollution degree | 2 |
| Response time tA | ≤ 25 ns |
| Stripping length | 16 mm |
| Connection method | Screw connection |
| Nominal frequency | 50/60 Hz |
| Shock (operation) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Tightening torque | 3 Nm (1.5 mm² ... 16 mm²) |
| Mode of protection | L-PEN |
| Nominal voltage UN | 60 V AC (TN) |
| TOV behavior at UT | 100 V AC (5 s / withstand mode) |
| Dimensional drawing | |
| Direction of action | 1L-N/PE |
| Insulating material | PA 6.6/PBT |
| Number of positions | 1 |
| Degree of protection | IP20 (only when all terminal points are used) |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Overvoltage category | III |
| Residual current IPE | ≤ 0.45 mA |
| CTI value of material | 600 |
| Rated load current IL | 80 A |
| Residual voltage Ures | ≤ 0.55 kV (at In) |
| Vibration (operation) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| IEC power supply system | TN |
| IEC test classification | II |
| Standards/specifications | IEC 61643-11 |
| Power distribution system | Single phase |
| Conductor cross section AWG | 15 ... 2 |
| Voltage protection level Up | ≤ 0.55 kV |
| Standby power consumption PC | ≤ 35 mVA |
| Conductor cross section rigid | 1.5 mm² ... 35 mm² |
| Maximum continuous voltage UC | 75 V AC |
| Surge protection fault message | optical |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Conductor cross section flexible | 1.5 mm² ... 25 mm² |
| Permissible humidity (operation) | 5 % ... 95 % |
| Nominal discharge current In(L-N) | 10 kA |
| Short-circuit current rating ISCCR | 25 kA |
| Max. backup fuse with branch wiring | 125 A AC (gG) |
| Measured limiting voltage MLV (L-N) | 630 V |
| Flammability rating according to UL 94 | V-0 |
| Nominal discharge current In(8/20) µs | 15 kA |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Nominal discharge current In(L+) - (L-) | 10 kA |
| Maximum discharge current Imax(8/20) µs | 40 kA |
| Measured limiting voltage MLV (L+) - (L-) | 810 V |
| Max. backup fuse with V-type through wiring | 80 A AC (gG) |
| Maximum continuous operating voltage MCOV (L-N) | 75 V AC |
| Maximum continuous operating voltage MCOV (L+) - (L-) | 100 V DC |
Descrição do produto
Surge arrester consisting of base element and plug-in protection with high-power varistor, for mounting on NS 35/7.5, one channel
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
