Em estoque Produto em alta
VAL-MS-CN 1000DC-PV/4+V-FM
VAL-MS-CN 1000DC-PV/4+V-FM 2907820 PHOENIX CONTACT Type 2 surge protection device
$0.00
USD
4966 em estoque
Especificações principais
GTIN:
4055626244211
Note:
Made to Order (non-returnable)
Orderkey:
2907820
(General):
≤ 20 µA DC
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| GTIN | 4055626244211 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2907820 |
| (General) | ≤ 20 µA DC |
| Catalog page | Page 65 (C-4-2017) |
| Packing unit | 1 pc |
| Country of origin | CN (China) |
| Custom tariff number | 85363030 |
| (Ambient conditions) | PBT-FR |
| Altitude (Dimensions) | ≤ 4000 mm |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| Color (Ambient conditions) | jet black RAL 9005 |
| Response time tA (General) | ≤ 25 ns |
| Depth (Key Commercial Data) | 64.7 mm |
| Width (Key Commercial Data) | 89 mm |
| EN type (Ambient conditions) | T2 |
| Height (Key Commercial Data) | 98.57 mm |
| Residual current IPE (General) | ≤ 250 µA AC |
| Shock (operation) (Dimensions) | (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Rated load current IL (General) | 80 A |
| Degree of protection (Dimensions) | IP20 (only when all terminal points are used) |
| Accessibility (Ambient conditions) | Accessible |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| Vibration (operation) (Dimensions) | 2g (5-500 Hz/2.5 h/XYZ) |
| Insulation resistance Riso (General) | > 5 GΩ (at 500 V DC) |
| Weight per Piece (excluding packing) | 686.000 g |
| Housing material (Ambient conditions) | PA 6.6-FR |
| Voltage protection level Up (General) | ≤ 3.8 kV |
| Mode of protection (Ambient conditions) | (L+) - (L-) |
| Degree of pollution (Ambient conditions) | 2 |
| SPD failure behavior (Ambient conditions) | OCM |
| Screw thread (Indicator/remote signaling) | M5 |
| (Protective circuit DC voltage side (DC)) | 3 A DC |
| Installation location (Ambient conditions) | Inside |
| Standards/regulations (UL connection data) | EN 50539-11 |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 85 °C |
| IEC test classification (Ambient conditions) | PV II |
| Short-circuit current rating ISCPV (General) | 2000 A |
| Conductor cross section AWG (Connection data) | 30 ... 14 |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Stripping length (Indicator/remote signaling) | 16 mm |
| Nominal discharge current (8/20) µs (General) | 20 kA |
| Tightening torque (Indicator/remote signaling) | 4.5 Nm |
| Maximum discharge current Imax(8/20) µs (General) | 40 kA |
| Maximum continuous operating voltage UCPV (General) | 1170 V DC |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Screw thread (Protective circuit DC voltage side (DC)) | M2 |
| Conductor cross section AWG (Indicator/remote signaling) | 15 ... 2 |
| Conductor cross section solid (Indicator/remote signaling) | 1.5 mm² ... 35 mm² |
| Stripping length (Protective circuit DC voltage side (DC)) | 7 mm |
| Conductor cross section AWG (UL indicator/remote signaling) | 10 ... 2 |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Operating current (Protective circuit DC voltage side (DC)) | 3 A AC |
| Operating voltage (Protective circuit DC voltage side (DC)) | 125 V AC |
| Tightening torque (Protective circuit DC voltage side (DC)) | 0.25 Nm |
| Switching function (Protective circuit DC voltage side (DC)) | PDT contact |
| Conductor cross section flexible (Indicator/remote signaling) | 1.5 mm² ... 25 mm² |
| Installation location of the disconnect device (Ambient conditions) | Internal |
| Conductor cross section AWG (Protective circuit DC voltage side (DC)) | 28 ... 16 |
| Conductor cross section solid (Protective circuit DC voltage side (DC)) | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible (Protective circuit DC voltage side (DC)) | 0.14 mm² ... 1.5 mm² |
Descrição do produto
Surge protection device for isolated direct current installations (1000 V DC), rail mounting, 5-pole base element with remote indication contact, 5-pole plug-in protection connector module with temper
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
